#!/bin/sh
#
# rc.inet2	This shell script boots up the entire network system.
#		Note, that when this script is used to also fire
#		up any important remote NFS disks (like the /usr
#		directory), care must be taken to actually
#		have all the needed binaries online _now_ ...
#
#               Uncomment or comment out sections depending on which
#               services your site requires.
#
# Author:	Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
# Modified for Slackware by Patrick Volkerding <volkerdi@slackware.com>


# At this point, we are (almost) ready to talk to The World...


# If there is a firewall script, run it before enabling packet forwarding.
# See the HOWTOs on http://www.netfilter.org/ for documentation on
# setting up a firewall or NAT on Linux. In some cases this might need to
# be moved past the section below dealing with IP packet forwarding.
if [ -x /etc/rc.d/rc.firewall ]; then
  /etc/rc.d/rc.firewall start
fi

# Turn on IPv4 packet forwarding support.
if [ -x /etc/rc.d/rc.ip_forward ]; then
  . /etc/rc.d/rc.ip_forward start
fi

# Start krb5kdc, which is the Kerberos version 5 Authentication Service
# and Key Distribution Center (AS/KDC). This needs to run first on both
# master and secondary KDCs.
if [ -x /etc/rc.d/rc.krb5kdc ]; then
  sh /etc/rc.d/rc.krb5kdc start
fi

# Start the Kerberos administration server. This typically runs on the
# master Kerberos server, which stores the KDC database.
if [ -x /etc/rc.d/rc.kadmind ]; then
  sh /etc/rc.d/rc.kadmind start
fi

# Start the Kerberos V5 slave KDC update server. This runs on a slave
# (secondary) KDC server. It allows the master Kerberos server to use
# kprop(8) to propagate its database to the slave servers.
if [ -x /etc/rc.d/rc.kpropd ]; then
  sh /etc/rc.d/rc.kpropd start
fi

# If /etc/rc.d/rc.rpc is executable, run it to load rpc.portmap, rpc.lockd,
# and rpc.statd. This is required to mount NFS partitions, unless you use
# the "nolock" mount option. It is also required to run an NFS server.
if [ -x /etc/rc.d/rc.rpc ]; then
  sh /etc/rc.d/rc.rpc start
fi

# Mount remote (NFS) filesystems:
if cat /etc/fstab | grep -v '^#' | grep -w nfs | grep -vwq noauto ; then
  echo "Mounting remote (NFS) file systems:  /sbin/mount -a -t nfs"
  # If we have a NETWORK_MOUNT_WAIT_COMMAND in /etc/default/nfs, run it to
  # provide some delay for the network to become available before mounting.
  # By default the command is "sleep 0" so we don't wait.
  if [ -r /etc/default/nfs ]; then
    . /etc/default/nfs
    [ ! -z "$NETWORK_MOUNT_WAIT_COMMAND" ] && $NETWORK_MOUNT_WAIT_COMMAND
  fi
  /sbin/mount -a -t nfs          # This may be our /usr runtime!
  # Show the mounted volumes:
  /sbin/mount -v -t nfs
fi

# Mount remote CIFS filesystems. Note that where possible, using CIFS is
# preferred over SMBFS. SMBFS is no longer actively maintained.
if cat /etc/fstab | grep -v '^#' | grep -w cifs | grep -vwq noauto ; then
  echo "Mounting remote CIFS file systems:  /sbin/mount -a -t cifs"
  # If we have a NETWORK_MOUNT_WAIT_COMMAND in /etc/default/nfs, run it to
  # provide some delay for the network to become available before mounting.
  # By default the command is "sleep 0" so we don't wait.
  if [ -r /etc/default/nfs ]; then
    . /etc/default/nfs
    [ ! -z "$NETWORK_MOUNT_WAIT_COMMAND" ] && $NETWORK_MOUNT_WAIT_COMMAND
  fi
  /sbin/mount -a -t cifs
  # Show the mounted volumes:
  /sbin/mount -v -t cifs
fi

# Mount remote SMB filesystems:
if cat /etc/fstab | grep -v '^#' | grep -w smbfs | grep -vwq noauto ; then
  echo "Mounting remote SMBFS file systems:  /sbin/mount -a -t smbfs"
  # If we have a NETWORK_MOUNT_WAIT_COMMAND in /etc/default/nfs, run it to
  # provide some delay for the network to become available before mounting.
  # By default the command is "sleep 0" so we don't wait.
  if [ -r /etc/default/nfs ]; then
    . /etc/default/nfs
    [ ! -z "$NETWORK_MOUNT_WAIT_COMMAND" ] && $NETWORK_MOUNT_WAIT_COMMAND
  fi
  /sbin/mount -a -t smbfs
  # Show the mounted volumes:
  /sbin/mount -v -t smbfs
fi

# Start the system logger if it is not already running (maybe because /usr
# is on a network partition). NOTE: Don't put /usr on a network partition,
# or even a separate local partition. This is not supported and is likely to
# cause some problems...
if [ -x /etc/rc.d/rc.syslog -a -d /var/log -a ! -r /var/run/syslogd.pid ]; then
  . /etc/rc.d/rc.syslog start
fi

# Start the inetd server:
if [ -x /etc/rc.d/rc.inetd ]; then
  /etc/rc.d/rc.inetd start
fi

# Start the OpenSSH SSH daemon:
if [ -x /etc/rc.d/rc.sshd ]; then
  echo "Starting OpenSSH SSH daemon:  /usr/sbin/sshd"
  /etc/rc.d/rc.sshd start
fi

# Start the BIND name server daemon:
if [ -x /etc/rc.d/rc.bind ]; then
  /etc/rc.d/rc.bind start
fi

# Start NIS (the Network Information Service):
if [ -x /etc/rc.d/rc.yp ]; then
  /etc/rc.d/rc.yp start
fi

# Start OpenVPN:
if [ -x /etc/rc.d/rc.openvpn ]; then
  /etc/rc.d/rc.openvpn start
fi

# Start the NFS server:
if [ -x /etc/rc.d/rc.nfsd ]; then
  /etc/rc.d/rc.nfsd start
fi

# Stuff you won't need follows.  ;-)

# # Start the network routing daemon:
# if [ -x /usr/sbin/routed ]; then
#   echo "Starting network routing daemon:  /usr/sbin/routed"
#   /usr/sbin/routed -g -s
# fi

# # Start the system status server:
# if [ -x /usr/sbin/rwhod ]; then
#   echo "Starting system status server:  /usr/sbin/rwhod"
#   /usr/sbin/rwhod
# fi